Basic Info.
Category1type1
Analog to Digital Converteradc
Category2
Power Management IC
Category1type3
Mpu (Microprocessor)
Category2type2
Current Regulator
Category2type4
DC/DC Converter
Category1type5
Digital to Analog Converter Dac
Transport Package
Standard
Product Description
Original New Ultra-Small, Low-Power, 12-Bit Analog-to-Digital Converter of TIADS1015IRUGR ADS1015IRUGTDescriptionThe ADS1013, ADS1014, and ADS1015 are precision analog-to-digital converters (ADCs) with 12 bits of resolution offered in an ultra-small, leadless QFN-10 package or an MSOP-10 package. The ADS1013/4/5 are designed with precision, power, and ease of implementation in mind. The ADS1013/4/5 feature an onboard reference and oscillator. Data are transferred via an I2C-compatible serial interface; four I2C slave addresses can be selected. The ADS1013/4/5 operate from a single power supply ranging from 2.0V to 5.5V.
Features
• ULTRA-SMALL QFN PACKAGE: 2mm × 1,5mm × 0,4mm
• WIDE SUPPLY RANGE: 2.0V to 5.5V
• LOW CURRENT CONSUMPTION: Continuous Mode: Only 150μA
Single-Shot Mode: Auto Shut-Down
• PROGRAMMABLE DATA RATE: 128SPS to 3.3kSPS
• INTERNAL LOW-DRIFT VOLTAGE REFERENCE
• INTERNAL OSCILLATOR
• INTERNAL PGA
• I2C™ INTERFACE: Pin-Selectable Addresses
• FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS (ADS1015)
• PROGRAMMABLE COMPARATOR (ADS1014 and ADS1015)
Applications
• Portable Instruments
• Battery Voltage and Current Monitoring
• Temperature Measurement Systems
• Consumer Electronics
• Factory Automation and Process Control
_________________________________________________________________________________________________________
Typical Application
Typical Advanced Configuration and Power Interface (ACPI) Application
Original New TPD6S300A USB Type-C™ Port Protector of TI
TPD6S300ARUKR Description
TPD6S300A is a single-chip USBType-C port protection device that provides 20V VBUS short-circuit overvoltage protection and IEC ESD protection.Since the release of the USB Type-C connector, many USB Type-C products and accessories that do not comply with the USB Type-C specifications have been released on the market.An example of this is a USB Type-C power delivery adapter that only runs 20V on the VBUS line.Another issue with USB Type-C is that because the pins are so close together in this small connector, mechanical twisting and sliding of the connector can short out the pins.This can cause the 20V VBUS to short to the CC and SBU pins.In addition, because the pins in the Type-C connector are so close together, there is a serious problem with debris and moisture causing the 20V VBUS pin to short out the CC and SBU pins.These non-ideal equipment and mechanical events necessitate that the CC and SBU pins must be able to withstand 20V even though these pins only operate at 5V or less.By providing overvoltage protection on the CC and SBU pins, the TPD6S300A can make the CC and SBU pins withstand voltages up to 20V without interfering with normal operation.This device places high-voltage FETs in series on the SBU and CC lines.When a voltage above the OVP threshold is detected on these lines, the high voltage switch is opened and isolates the rest of the system from the high voltage condition present on the connector.Finally, most systems require IEC61000-4-2 system-level ESD protection for their external pins.The TPD6S300A integrates IEC61000-4-2 ESD protection for the CC1, CC2, SBU1, SBU2, DP and DM pins, eliminating the need to place high-voltage TVS diodes (externally) on the connector.
FEATURES
• 4-channel VBUS short-circuit overvoltage protection (CC1, CC2, SBU1, SBU2 or CC1, CC2, DP, DM): withstands 24V DC
• 6-channel IEC 61000-4-2ESD protection (CC1, CC2, SBU1, SBU2, DP, DM)
• CC1 and CC2 overvoltage protection FETs can handle up to 600mA, thus supporting VCONN supply current flow
• Integrated CC dead battery resistor to handle dead battery use cases in mobile devices
• Phase Advantages over TPD6S300
- Higher dead battery performance
- USBType-C port remains connected during IEC 61000-4-2 ESD shock
• 3mm × 3mm WQFN package
Applications
• Laptops
• Tablets
• Smartphones
• Monitors and TV•Dock
New and original FCBGA-486 ARM® Cortex®-A53 IC
MIMX8MM6CVTKZAADescriptionThe i.MX 8M Mini applications processor representsNXP's latest video and audio experience combining
state-of-the-art media-specific features withhigh-performance processing while optimized for lowest
power consumption.The i.MX 8M Mini family of processors features advanced implementation of a quad Arm®
Cor-tex®-A53 core, which operates at speeds of up to 1.8 GHz. A general purpose Cortex®-M4 400 MHz
core processor is for low-power processing. The DRAM controller supports 32-bit/16-bit LPDDR4, DDR4, and
DDR3L memory. A wide range of audio interfaces are availabler interfaces for connecting
peripherals, such as USB, PCIe, and Ethernet,
Features Arm Cortex-A53 MPCore platform
Quad symmetric Cortex-A53 processors
• 32 KB L1 Instruction Cache
• 32 KB L1 Data Cache
• Media Processing Engine (MPE) with NEON technology supporting the Advanced Single Instruction Multiple Data architecture:
• Floating Point Unit (FPU) with support of the VFPv4-D16 architecture
Support of 64-bit Armv8-A architecture
512 KB unified L2 cache
Arm Cortex-M4 core platform
Low power microcontroller available for customer application:
• low power standby mode
• IoT features including Weave
• Manage IR or Wireless Remote
Cortex M4 CPU:
• 16 KB L1 Instruction Cache • 16 KB L1 Data Cache
• 256 KB tightly coupled memory (TCM)
Connectivity
One PCI Express (PCIe)
• Single lane supporting PCIe Gen2
• Dual mode operation to function as root complex or endpoint
• Integrated PHY interface
• Support L1 low power sub-state
Two USB 2.0 OTG controllers with integrated PHY interfaces:
• Spread spectrum clock support
Three Ultra Secure Digital Host Controller (uSDHC) interfaces:
• MMC 5.1 compliance with HS400 DDR signaling to support up to 400 MB/sec
• SD/SDIO 3.0 compliance with 200 MHz SDR signaling to support up to 100 MB/sec
• Support for SDXC (extended capacity)
One Gigabit Ethernet controller with support for Energy Efficient Ethernet (EEE), Ethernet AVB, and IEEE 1588
Four Universal Asynchronous Receiver/Transmitter (UART) modules
Four I2C modules
Three ECSPI modules
On-chip memory
Boot ROM (256 KB)
On-chip RAM (256 KB + 32 KB)
GPIO and pin multiplexing
General-purpose input/output (GPIO) modules with interrupt capability
Input/output multiplexing controller (IOMUXC) to provide centralized pad control
Power management
Temperature sensor with programmable trip points
Flexible power domain partitioning with internal power switches to support efficient power management
External memory interface
32/16-bit DRAM interfaces:
• LPDDR4 (up to 1.5 GHz)
• DDR4-2400
• DDR3L-1600
8-bit NAND-Flash, including support for Raw MLC/SLC devices, BCH ECC up to 62-bit, and ONFi3.2 compliance (clock rates up to 100 MHz and data rates up to 200 MB/sec)
eMMC 5.1 Flash (2 interfaces, uSDHC1 and uSDHC3)
SPI NOR Flash (3 interfaces)
FlexSPI with support for XIP (for ME in low-power mode) and parallel read mode of two identical FLASH devices
Multimedia
Video Processing Unit:
• 1080p60 VP9 Profile 0, 2 (10-bit)
• 1080p60 HEVC/H.265 Decoder
• 1080p60 AVC/H.264 Baseline, Main, High decoder
• 1080p60 VP8
• 1080p60 AVC/H.264 Encoder
• 1080p60 VP8
• TrustZone support
Graphic Processing Unit:
• GCNanoUltra for 3D acceleration
• GC320 for 2D acceleration
LCDIF Display Controller:
• Support up to 2 layers of overlay
• Support up to 1080p60 display through MIPI DSI
MIPI Interface:
• 4-lane MIPI CSI interface
• 4-lane MIPI DSI interface
Audio:
• S/PDIF input and output, including a new Raw Capture input mode
• Five synchronous audio interface (SAI) modules supporting I2S, AC97, TDM, codec/DSP, and DSD interfaces, including one SAI with 8 Tx and 8 Rx lanes, one SAI with 4 Tx and 4 Rx lanes, two SAI with 2 Tx and 2 Rx lanes, and one SAI with 1 Tx and 1Rx lane. Support over 20 channels of audio subject to I/O limitations.
• 8-Channel Pulse Density Modulation (PDM) input
System debug
Arm CoreSight debug and trace architecture
Trace Port Interface Unit (TPIU) to support off-chip real-time trace
Embedded Trace FIFO (ETF) with 4 KB internal storage to provide trace buffering
Unified trace capability for Quad Cortex-A53 and Cortex-M4 CPUs
Cross Triggering Interface (CTI)
Support for 5-pin (JTAG) debug interface
Security
Resource Domain Controller (RDC) supports four domains and up to eight regions of DDR
Arm TrustZone (TZ) architecture:
• Support Arm Cortex-A53 MPCore TrustZone
On-chip RAM (OCRAM) secure region protection using OCRAM controller
High Assurance Boot (HAB)
Cryptographic acceleration and assurance (CAAM) module and Assurance Module:
• Support Widevine and PlayReady content protection
• Public Key Cryptography (PKHA) with RSA and Elliptic Curve (ECC) algorithms
• Real-time integrity checker (RTIC)
• DRM support for RSA, AES, 3DES, DES
• Side channel attack resistance
• True random number generation (RNG)
• Manufacturing protection support
Secure non-volatile storage (SNVS):
• Secure real-time clock (RTC)
Secure JTAG controller (SJC)
New and original Wide Input 4.5-V to 100-V, 1-A Synchronous Buck / Fly-Buck Converter of TI LM5161PWPR DescriptionThe LM5161 is a 100V, 1A synchronous buck converter integrating high-side and low-side metal oxide semiconductor field effect transistors (MOSFETs).The constant on-time control scheme requires no loop compensation and supports high step-down ratios with fast transient response.An internal feedback amplifier maintains ±1% output voltage regulation over the full operating temperature range.The on-time is inversely proportional to the input voltage, resulting in an approximately constant switching frequency.Peak and valley current limiting circuitry prevents overloads from occurring.The undervoltage lockout (EN/UVLO) circuit independently provides adjustable input undervoltage threshold and hysteresis.The LM5161, through its FPWM input pin, can be selected to operate in forced continuous conduction mode (CCM) at all load levels, or in discontinuous conduction mode (DCM) under light load or no-load conditions.When operating under forced CCM, the LM5161 supports multiple outputs and isolated Fly-Buck applications where low power consumption is a critical issue.When programmed for DCM operation, the LM5161 provides a tightly regulated buck output without the use of any external ripple feedback injection circuitry.
Features
• Wide 4.5V to 100V input voltage range
• Integrated high-side and low-side switches
- no Schottky diodes required
• 1A maximum load current
• Constant on-time control
- no external loop compensation
- fast transient response
•Selectable DCM buck operation at light load
•CCM option supports multi-output Fly-Buck™
•No external ripple circuit required (when FPWM=0)
•Approximately constant switching frequency
•Frequency adjustable up to 1MHz
•Programmable soft Start-up time
• Pre-biased start-up
• Peak current limit protection
• Adjustable input undervoltage lockout (UVLO) and hysteresis
• ±1% feedback voltage reference
• Thermal shutdown protection
• Create a custom design using the LM5161 with WEBENCH® Power Designer
Applications
• Industrial Programmable Logic Controllers
• IGBT Gate Drive Bias Supply
• Primary and Secondary Side Biasing for Telecom DC/DC
• Electronic Meter Power Line Communication
• Low Power (<; 12W) Isolated DC- DC(Fly-Buck)
Original New low-cost, precision, fully-integrated16-bit digital-to-analog converters of TI
DAC8750IPWPR DAC8750IPWPDescription
The DAC7750 and DAC8750 are low-cost, precision, fully-integrated 12-bit and 16-bit digital-to-analog converters (DACs) designed to meet the requirements of industrial process-control applications. These devices can be programmed as a current output with a range of 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA. The DAC7750 and DAC8750 include reliability features such as CRC error checking on the serial peripheral interface (SPI™) frame, a watchdog timer, an open circuit, compliance voltage, and thermal alarm. In addition, the output current can be monitored by accessing an internal precision resistor.
These devices include a power-on-reset function to ensure that the device powers up in a known state (IOUT is disabled and in a Hi-Z state). The CLR terminal sets the current output to the low end of the range if the output is enabled. Program the zero and gain registers to digitally calibrate the device in the end system. The output slew rate is also programmable by register. These devices can superimpose an external HART® signal on the current output, and can operate with a 10-V to 36-V supply.
All versions are available in both 40-pin VQFN and 24-pin TSSOP packages.
Feature• Current output options: -0mA to 24mA - 4mA to 20mA - 0mA to 20mA
• ±0.1% FSR typical total unadjusted error (TUE)
• DNL: ±1LSB maximum
• Maximum loop compliance voltage: AVDD - 2V
• Internal 5V reference: 10ppm/°C (max)
• 4.6V internal power output
• CRC framing error checking
• Watchdog timer
• Thermal alarm
• Open circuit alarm
• Pin for monitoring output current
• On-chip fault Alerts
• User calibration for offset and gain
• Wide temperature range: -40°C to 125°C
• Package: 6mm × 6mm 40-pin VQFN and 24-pin HTSSOP
Application
•Analog output module
•CPU (PLC controller)
•Flow transmitter
•Other sensors Transmitter
•Actuator
•Process analysis (PH, gas, concentration, force and humidity)
D/C | 2022+ |
Qty in stock | More than 500 pcs-1000pcs |
Lead time | ASAP |
Remark | New and original ;100% good quality |
Warranty | 60 days warranty,100% brand new ,can send to White horse for quality checking |
Payment | T/T ;HSBC,CITI |
Shipment | UPS, DHL ,TNT ,FEDEX or by your own forwarder |
About US
R&OTECH (HK) Technology Co., Limited is a professional electronic component supplier. The company is committed to navigation, shipping, exploration, industrial automation, imaging, satellite navigation, instrumentation, scientific research, medical, communications, high-end electronic products and other auxiliary products supply, with the world's major enterprises to maintain a long-term, friendly and stable relations of cooperation. We offer IC, Module, Connector, Capactior. Resistor to customers all over the world.
Warranty Terms
The warranty applies to all electronic components sold by R&OTECH Electronics, which are operated in accordance with the product and operational specifications. R&OTECH agrees to transfer to Customer whatever transferable warranties our receives from the manufacturer of products sold to Customer. R&OTECH electronics extends two months limited warranty for the products it sells. This warranty is contingent upon proper storage and handling of the product and does not cover products that have been subjected to physical abuse or electrical stress from improper handling and storage of Electro Static Discharge ("ESD") sensitive products. All ESD sensitive products must be stored per manufacturer's recommendations. No warranty will apply if the product has been subject to misuse, static discharge, improper storage or handling, non-adherence to ESD storage and handling procedures, neglect, accident, modification, or has been soldered or altered in any way whatsoever.
Counterfeit Check
R&OTECH recognizes that counterfeiting of components is a serious problem in the worldwide.
All products ordered from us can have a number of tests completed before it is shipped to you. It is against company policy to ship failed parts; meaning you will always receive the best product.
This is achieved as we can send products to an independent, ISO approved testing laboratory, when necessary, to make sure our clients are provided with 100% New and Original products. We also, from time to time, perform detailed testing in accordance with our quality procedure in order for us to evaluate the effectiveness and quality standards of our suppliers.
Address:
Floor 10, Block 2, No. 18 Building, Huangjing Town, Dongye Road, Houjie, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Instruments & Meters
Company Introduction:
R&OTECH is a professional electronic component supplier and Our products are including: IC chips, Electronic Connectors, Capacitors, Resistors, Diodes, Triodes. Module, MCU, FPGA, and brands Such as TI, STM, NXP, ONSEMI, MICRON, MICROCHIP, INTEL, AMD, SEAGATE, INF, RENESAS, JST, MOLEX, etc. With rich experience in the electronic component market, R&OTECH knows how deep down inside the global electronics industry supply chain keeps developing and changing. As opportunities and challenges exist side by side, we play the role of an independent distributor, we will help you find the right electronic component based on your part numbers.
R&OTECH provides stock and shortage original electronic components to our varieties of our middle and high-end clients which are from industries such as Medical, Military, Aerospace, Computer, Peripheral, Telecommunications, AI, Robotics, Transportation, Smart Devices Manufactures etc, .
Our customers from all over the world, Italy, USA, England, Germany, Turkey, Russian, Welcome your inquiry and sincerely Looking forward to work with you.